DC-Unlocker V1.00.0629 Huawei U8150 IDEOS added Finally


Added :

Huawei U8150 IDEOS (ZONG Ideos, T-Mobile comet and other brands)
-direct unlock
-reset wrong code counter

huawei u8150 IDEOS step by step detect and unlock guide

Huawei U8150 IDEOS detect and unlock procedure

Turn off phone, then hold at same time buttons “Vol. -” and “End call” (red button) and then press “Power. Hold all 3 buttons pressed for 5 seconds. Phone should hang on startup. After this connect usb cable.
Huawei IDEOS U8150 phone unlock. Press and hold Vol- End call Power buttons

ORT-JTAG – CDMA – ZTE S160 , S191 , S192 , F280 , C360 , and MORE Added.


ORT – JTAG UPDATE
[27 Apr 2011]

Description :

  • ORT Plus V1.41 Released
  • ZTE S160 Repair Dead Boot
  • ZTE S191 Repair Dead Boot
  • ZTE S192 Repair Dead Boot
  • ZTE F280 Repair Dead Boot
  • ZTE C360 Repair Dead Boot

ORT Plus V1.41 Release Notes :
  • MSM 6280 CPU ID [0x100C00E1] Integrated for recognization
  • PXA 270 CPU ID [0x49265013] Integrated for recognization
  • MSM 7200 CPU ID [0x200E00E1] Integrated for recognization

Released Stuffs :

  • ZTE S160 Dump
  • ZTE S160 JTAG Pinout
  • ZTE S160 Instructions
  • ZTE S191 Dump
  • ZTE S191 JTAG Pinout
  • ZTE S191 Instructions
  • ZTE S192 Dump
  • ZTE S192 JTAG Pinout
  • ZTE S192 Instructions
  • ZTE F280 Dump
  • ZTE F280 JTAG Pinout
  • ZTE F280 Instructions
  • ZTE C360 Dump
  • ZTE C360 JTAG Pinout
  • ZTE C360 Instructions
  • ORT Plus V1.41

Full Flashes Uploaded :

Previous Update :

ORT Team Blog :

Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand

  • Samsung GT-i9003 Galaxy SL [here]

ORT is a Real JTAGger’s choice

http://www.ORT-JTAG.com
http://www.GPGORT.com

RIFF JTAG – CDMA Samsung S239 (MPower) Repair supported


26.04.2011  CDMA Samsung S239 (MPower) Repair supported
Resurrecting Samsung S239 is simple. Phone is auto powered on with USB Cable connected; battery presence is not required.
To resurrect Samsung S239:

  • Solder JTAG cable to Samsung S239 JTAG pads;
  • Connect ignition cable for auto power on or use battery;
  • Make sure Samsung S239 is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.